1723 Wall Mount Screw Size
Does anybody know the maximum screw size (diameter) that can be used with the 1723 Wall Mounts? Trying to determine which drywall anchors are compatible with them if a stud isn’t available.
Technical questions
Do you have technical issues or want to ask how to...? Let us help you.
Latest topics
THX 1723 S surround placement back wall
Hi all, Maybe a stupid question but just checking with you to be sure… I am placing my THX 1723 S against my back wall I found this info regarding this on the Arendal website: Therefore when mounting as the surround back channels in a seven-channel system, the in-phase drivers...
Arendal 1723 2S and Magnepan 1.7i integration
Does anyone have an experience with Magnepan speakers integration?
Subwoofer placement next to AV component rack?
The general recommendation is that the subwoofer drivers shouldn’t be within 10cm of a surface like a wall or sofa. Would there be any issue if it was placed right up against an open air component rack like the photo attached?
REW and bass correction
I was at a friends house yesterday and adjusteds the 1961 1V sub to a house curve in REW. But before the correction the sub very there and exciting. After applying a house curve (which it followed perfectly), it sounded very dull and bassless. What is your experience with applying...
Recommended amp for 1961? 4 ohm
Hello everybody . I’m about to build a 1961 series HT and have a Marantz sr6007. Currently used as a pre amp with Genelec 8030c in a 3.2 setup. I got two 1961 1961 1s subs. So, if I buy 3 1961 monitors what are the recommended amp? Its 4...
Speaker room positioning
Hi I’m about to order a full set of 7.1(.2) 1723 S, however I have a couple of concerns on the side and read speaker placement, and which speakers to buy for the side/rears If you check the plan (note the side wall of 2.5m has been closed), I...
Do the 1723 1V & 2V subwoofers sound the same at identical volumes?
Let’s say I had a 1723 1V and a 2V at identical positions at the same volume (say, 90dB). Are they going to be more or less indistinguishable? I’m trying to determine if the only reason to opt for a 2V is if the 1V’s SPL output at max volume...
YPAO speaker measurements
I’m currently integrating my new 1723 1V subwoofer. The sub is set at reference level. When running YPAO the SW distance is measured at 30 cm while it actually is about 135 cm from the LP. The level is set at -6.5dB by YPAO. This results in losing a whole...
Class AB or D ?
Just out of curiosity, I wanted to see if people are using more class AB or class D amplifiers? Also, what was driving the reason for purchasing the class of amp you have? It Seems class D is becoming more popular these days.