1723 Subwoofer 2

Legacy product

The Subwoofer 2 is the pinnacle of bass accuracy. Using two of our proprietary 13.8” driver driven by our 1000W RMS Avalanche DSP amp, the cabinet volume has been sized to produce an optimally damped system, producing low distortion, naturally deep bass, that drops and drops. A further performance edge is provided by our dual opposed, force cancelling driver topology to deliver clean deep hits, without cabinet movement subtracting anything from the driver output. To be safe, we’ve over engineered the cabinet with inch thick walls and two inch thick baffles, so you won’t feel a thing even when crashing out the most bombastic soundtracks.

Professional reviews

EISA (the Expert Imaging and Sound Association) is the unique worldwide association of over 60 special interest magazines and websites that test and report on hi-fi, home theatre, in-car electronics, mobile devices and photography from 29 countries.

EISA award

Even driven to reference levels which is normally too loud for my ears the 1723s never distorted or cracked under pressure. This cant be said of other popular brands that I have heard.

Spare Change

When we are talking about clean and effortless deep bass, we have hardly heard it better than this “doomsday machine” from arendal.

Lyd&bilde

Technical specifications

2x 13.8″
Sealed
High Density Fiberboard (HDF)
Avalanche 1000 DSP, 1000W RMS
2,5 meters
EQ1 20-160Hz (+/-3dB)
EQ2 32-160Hz (+/-3dB)
Power cable. Manual.
53H x 42W x 50D cm
54.2H x 42W x 50D cm
41.4 kg
50 hours

Frequency response

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

Product compliance

CB Scheme is an international system for mutual acceptance of test reports and certificates dealing with the safety of electrical and electronic components, equipment, and products. It assures that electrical and electronic products match the strictest levels of safety and performance following the IEC standard.
CE marking is an administrative marking with which the manufacturer or importer affirms its conformity with European health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
RoHS is an abbreviation for “Restriction of (the use of certain) Hazardous Substances in electrical and electronic Equipment”. This directive restricts the use of ten hazardous materials in the manufacture of various types of electronic and electrical equipment. It is closely linked with the Waste Electrical and Electronic Equipment Directive (WEEE) 2002/96/EC which sets collection, recycling and recovery targets for electrical goods and is part of a legislative initiative to solve the problem of huge amounts of toxic electronic waste.
FCC mark is a voluntary mark employed on electronic products manufactured or sold in the United States which indicates that the electromagnetic radiation from the device is below the limits specified by the Federal Communications Commission and the manufacturer has followed the requirements of the Supplier's Declaration of Conformity authorization procedures.
Support