TECH SPECS AND MORE
1723 Subwoofer 2S
Our true-to-scale AR experience lets you place your speaker directly into your room using your phone – exactly where you want to place it in real life.
TECH SPECS
| Specifications | 1723 Subwoofer 2S | Compare |
|---|---|---|
| Design | — | — |
| Dimensions (H/W/D) | 53 x 42 x 50 cm<br>(20.9 x 16.5 x 19.7 in) | — |
| Dimensions with feet (H/W/D) | — | — |
| Weight | 41.4 kg<br>(91.6 lbs) | — |
| Enclosure | Sealed | — |
| Enclosure material | High Density Fiberboard (HDF) | — |
| Ports | — | — |
| Break-in for optimal performance | 50 hours | — |
| Recommended amplifier | — | — |
| Included | Power cable. Manual. | — |
| Tweeter | — | — |
| Midrange | — | — |
| Woofer | 2 x 13.8″ | — |
| Frequency response | EQ1 17Hz-200Hz (+/-3dB) EQ2 24Hz-200Hz (+/-3dB) EQ3 33Hz-200Hz (+/-3dB) | — |
| Impedance | — | — |
| Crossover frequency | — | — |
| Sensitivity | — | — |
Frequency
Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.
CEA 2010
CEA-2010 is measured at 2m distance, following current guidelines. CEA-2010 measurements should be presented in 1m Peak measurements currently, although many are still using 2m RMS, so we include these as well.
Please note that our vented design is extremely difficult to accurately measure as the port and driver are on different planes. We are suffering some output on CEA-2010 measurements for this reason.
