Every now and then we get questions on how high the tweeter is placed on our speakers, so it is easier to plan the positioning. Here is a drawing that shows the tweeter height from the bottom of the speaker. It is 28,4cm or 11.2 inches for our 1723 Surround S THX speaker.
Calibrating multiple subwoofers can be a daunting task that can take a lot of time. We came across this well-structured and easy-to-understand tutorial, that is definitely worth watching.In his video, he is using the miniDSP to do all the settings, but you can actually do a similar setup with our 1723 Subwoofers, as they have […]
Our Avalanche IQ amps use the RBJ Q-convention for the parametric EQs.With this you can easily calculate the PEQ settings inside a program like REW.
This is a common question that is well researched. Let’s break down when you can get by with a single subwoofer, and why you most likely want two. One Seat If you are only worried about low-frequency sound at one seat, you are most likely fine with one subwoofer. With the help of ideal placement […]
The input impedance on our legacy subwoofers with the Avalanche 500DSP and 1000DSP amplifiers is 36kOhm.
Taxes/duties depend on where we are shipping. You can find details here but we will expand on that information a little more below. DDP vs DAP/DTU DDP or Delivery Duty Paid, means we cover taxes/duties before shipment. Customers like this because they don’t have to worry about paying anything as the speakers enter the country. […]
Here you can see the width of the entire spike bar as well as the distance between each spike itself and the height of the spike.
Perhaps you have noticed the 4 Ohm and 8 Ohm print on the speaker terminals? Bi-Wiring These are only to indicate that the tweeter is an 8 Ohm speaker when you are Bi-wiring the speakers by removing the jumpers between the upper and lower speaker terminals. This is mostly done in a stereo […]
Our TriAxial surround speakers have side drivers, where the one firing backwards in the room, is out of phase with the other drivers. Therefore when mounting as the surround back channels in a seven-channel system, the in-phase drivers should be mounted pointing at each other in the center of the rear wall. Meaning, the Left […]
Here are the settings we recommend for Stereo purposes, specifically stereo setups that do not have room correction or adjustability on the subwoofer output. For stereo sources with room correction please refer to the home cinema guide. Settings not mentioned are ones we would rather leave as is unless you for any specific reason want […]