Perhaps you have noticed the 4 Ohm and 8 Ohm print on the speaker terminals? Bi-Wiring These are only to indicate that the tweeter is an 8 Ohm speaker when you are Bi-wiring the speakers by removing the jumpers between the upper and lower speaker terminals. This is mostly done in a stereo […]
Our TriAxial surround speakers have side drivers, where the one firing backwards in the room, is out of phase with the other drivers. Therefore when mounting as the surround back channels in a seven-channel system, the in-phase drivers should be mounted pointing at each other in the center of the rear wall. Meaning, the Left […]
Here are the settings we recommend for Stereo purposes, specifically stereo setups that do not have room correction or adjustability on the subwoofer output. For stereo sources with room correction please refer to the home cinema guide. Settings not mentioned are ones we would rather leave as is unless you for any specific reason want […]
The power consumption of these subwoofers is 3W in standby mode and 17W in active mode without playing. You might also be interested in the max power consumption for the amps.
You will receive a delivery confirmation including tracking information from our carrier once your order has been dispatched. All EU and international orders ship from our hub in the Netherlands to the destination countries. US and Canada orders are dispatched from our warehouse in Chicago. NOTE: Please check your SPAM filter before contacting us if […]
For normal usage of the 1723 Surround S and you must have the bridges connected. By removing the bridges you disconnect the side drivers on the 1723 Surround and 1723 Surround S. This can be done if you want to use the Surround speakers as Atmos channels to get a more direct sound from the […]
Every now and then we get questions on how high the tweeter is placed on our speakers, so it is easier to plan the positioning. Here is a drawing that shows the tweeter height from the bottom of the speaker. It is 34,2cm or 13.5 inches for our 1723 Surround THX speaker.
Prices on the outlet are normally per item. And there is a note under the picture weither it is for a pair of speakers or a single speaker. The following are priced as a pair. The 1723 Surround, 1723 Surround S, 1961 Monitor, 1961 Bookshelf, 1961 Height and 1961 Surround.
Why Do I Need to Balance Output Levels for All Channels in a Surround Sound System and What’s the Best Way to Do So? Level balancing (using your AVR’s built-in test tone generator) makes sure that your system is precisely calibrated to match the acoustical properties of your room, just as technicians do when they’re […]
Have trouble connecting our app to your 1723 subwoofer? Read on for great troubleshooting tips. The most common mistake we see is attempting to pair 1723 subwoofers directly to a phone by using the Bluetooth menu. The app will connect with the subwoofer when you open the app. Please make sure you have accepted to share […]